From 8bebc50e884a91f0bb81100edaf32444d82b4b68 Mon Sep 17 00:00:00 2001
From: Lucy Hao <hao.lucyy@gmail.com>
Date: Tue, 10 Oct 2023 18:36:47 -0700
Subject: [PATCH] padding

---
 pages/hardware.mdx | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/pages/hardware.mdx b/pages/hardware.mdx
index 326dba3..b8fa6fd 100644
--- a/pages/hardware.mdx
+++ b/pages/hardware.mdx
@@ -31,10 +31,12 @@ The above criteria resulted in our current design, which uses a 2L polycarbonate
 The parts were modeled on SolidWorks and The custom cap has 3 1/4-inch ID barbs on top bonded onto the main piece with silicone. It is modeled after the original screw cap, which is a 53B closure with a thread with 4 turns per inch.
 
 <Lid />
+<br />
 
 The blower is adapted from a design posted on Thingiverse[^2]. It has been modified to be free-standing, fit a 280 motor, and feed air directly into 3/16-inch ID tubing. Note that the barb is a separate piece from the top piece so that it can be printed upright. This guarantees a clean hole for air to flow into the connecting tube.
 
 <Blower />
+<br />
 
 ## Design Considerations
 
-- 
GitLab